Tap Water RO Membrane
Description
Operation Limit and Conditions
| Max Working Pressure | 600psi(4.14Mpa) |
| Max Feedwater Flow | 75gpm(17m³/h)(8040) |
| 16gpm(3.6m³/h)(4040) | |
| Max Inflow Temperature | 45℃ |
| Max Inflow SDI15 | 5 |
| Residual Chlorine Concentration of Feedwater | ＜0.1ppm |
| PH Range of Feedwater During Continuous Operation | 3-10 |
| PH Range of Feedwater During Chemical Cleaning | 2-12 |
| Max Pressure Drop of Single Membrance element | 15psi(0.1Mpa) |
Testing Conditions
| Testing Pressure | 225psi(1.55Mpa) |
| Temperature of Testing Solution | 25℃ |
| Concentration of Testing Solution(NaCI) | 2000ppm |
| PH Value of Testing Solution | 7.5 |
| Recovery Rate of Single Membrane Element | 15% |
Remarks
Proper start-up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Following the proper start-up sequence also helps ensure that system operating parameters conform to design specifications so that system water quality and productivity goals can be achieved.
Before initiating system start-up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.
Request for catalog or technical support, please click here. 
Be the first to review “Tap Water RO Membrane”
You must be logged in to post a review.
Reviews
There are no reviews yet.